Machines are intended for the hot stamping of forgings from the cut-to-length sections or bars in the multiple-impression press tools. Following HFM operation modes are available: single stroke, continuous stroke, setup; this type equipment is capable of performing the following process operations:

  • upset forging;
  • broaching;
  • punching;
  • necking;
  • cutting;
  • bending.

Based on the type of impact on the workpiece, HFM is classified as press, but it is of higher performance. Forgings are stamped directly from bar or separate piece blanks with insignificant amount of flash and draft, as well as without these with close tolerances and allowances, which provides considerable metal saving. Stamping at HFM provides the production of forgings of more complex shape and high accuracy of parts manufacture.

© Copyright 2016 PAO AMCDP Website creation Web Love Me